THINK STRIP BRUSHES Think Quality Strip Brushes From Gordon Brush Strip Brushes, often called Channel Back Brushes, are versatile and durable. Strip brushes can be customized to fit an enormous amount of applications, including but not limited to: sealing, conveyor cleaning, surface cleaning, surface roughening, dusting, product separation or transfer, tensioning devices, static dissipation, external or internal pipe cleaning, filter or screen cleaning, glass washing or fruit or vegetable washing. The size of the brush is determined by channel size (the metal back), fill material and brush configuration (such as straight, coiled, wound or cup-like). Trim lengths are virtually		unlimited; channel sizes range by number, the smaller the number the smaller the base width; Bristle material depends on what your application requires. Almost all bristles are available including conductive, in a range of diameter sizes.  Strip Channel  Information   Channel   Size   Width     #2   1/8"     #3   5/32"     #4   3/16"     #5   7/32"     #6     15/64"     #7     5/16"     #8     13/32"     #10   7/16"   DOC #110473

		THINK TWISTED-IN-WIRE BRUSHES Think Quality Twisted-In-Wire Brushes From Gordon Brush Twisted-In-Wire Brushes are known by many names, such as spiral, tube, flue, bottle, pipe, boiler or power brushes. They all represent the same brush construction. In essence a piece of wire is doubled over and bristle material is inserted between the fold of the wire stem. The wire stem is then twisted into a brush. Ends of the brush can vary, depending on your needs. For example, a brush can have a cut tip, rounded tip, or bristled tip. It can have a long end or handle, a short end, one with a ring, loop, or cut.		Typically the bristle material is located at one end of the brush, and the handle extends from it. However, the bristle can be centered in the wire, with two long ends, one on each side. There are standard lengths for the brush part and wire but Gordon Brush can make whatever you need. See the table listing below for some of the sizes available.     DOC #110474

Brush  Type	Brush  Diameter	Brush  Length	Overall  Length	End Types	Base Wire  Types
Micro  Spiral	.028"(.7mm)-  .125"(3.2mm)	.125"(3.2mm)-  1"(25mm),  longer on request	.625"(16mm)-  16" (406mm)	Cut,  Rounded,  Tufted; Loop,  Ring	Stainless Steel
Regular  Spiral	.126"(3.2mm)-  16" (406mm)	.50"(13mm)-  24"  (610mm)	.625"(16mm)-  As  Long As  Needed	Cut,  Rounded,  Tufted,  Nipple  Loop,  Ring	Stainless Steel,  Galv. Steel,  Aluminum
Double  Spiral	1/2"(13mm)-  3"(76mm)	2-1/2"(64mm)-  4"(102mm)	5"(127mm)-  7"(178mm)	Cut, Threaded,  Nipple	Stainless Steel,  Galv. Steel
Paddle  Brushes	1/4"(6mm)-  1-3/16"(30mm)	9/16"(14mm)-  5/8"(16mm)	2-1/8"(54mm)-  2-1/4"(57mm)	Cut	Stainless Steel,  Galv. Steel